Does anyone have a Smartcraft Vessel View display for sale as shown below?
- Thread starter marks737
- Start date
I have the later version (Vessel View 7) if you are interested. This is a couple of pictures of it:
Last edited:
- Dec 31, 2006
- 2,823
- Boat Info
- H2O Therapy
2006 Sundancer 48
Novurania 430DL
HighField 340-FCT
Yamaha EX-R
Raymarine
PADI DM
- Engines
- Cummins QSC 540's
Tom, would that just plug into my boat or would I have to change a whole bunch of stuff?
cstinehour
Member
- Dec 16, 2017
- 87
- Boat Info
- 2008 350 Sundancer, Axiom 12 MFD
MMSI# 338313845
- Engines
- T-VD 8.1 S Horizon DTS MPI MIE (T-370 hp - 276 kW)
What are you asking for it?
Assuming your boat has Diesel View and Smartcraft Link Gauges then it will work and control your gauges.
You will require two adapter harness' -
Mercury P/N 4993480 (Smartcraft Vessel View Adapter Harness)
Mercury P/N 84-892323A01 or T01 (Cummins Smartcraft Dual Wake Adapter Ignition Harness)
Both are inexpensive and available through Seaboard Marine https://www.sbmar.com/search-results/?q=smartcraft&page_num=5
You might check with @villain style ; I think he bought these harness and never used them.
Be aware the NMEA2000 port on this one is not active - all else works just fine (see pics below).
Last edited:
I think $600 would do it for me.
cstinehour
Member
- Dec 16, 2017
- 87
- Boat Info
- 2008 350 Sundancer, Axiom 12 MFD
MMSI# 338313845
- Engines
- T-VD 8.1 S Horizon DTS MPI MIE (T-370 hp - 276 kW)
Would this work for (2)T-VD 8.1 S Horizon DTS MPI MIE (T-370 hp - 276 kW ) Engines?
Todd320
Well-Known Member
- Jul 21, 2016
- 1,508
- Boat Info
- 2007 Sea Ray 320DA
- Engines
- Twin V-drive 5.7L 350 Horizon
So it’s a perfect/new VV7, except the NMEA 2k does not work, correct?
It's used and came out of my boat. I believe installed in 2015.
- Oct 10, 2006
- 1,710
- Boat Info
- 2006 44 DA
QSC 8.3s
- Engines
- Cummins QSC 8.3s 500HO
I do have those cables if interested...
CaptRonn
Well-Known Member
- May 25, 2016
- 1,550
- Boat Info
- 1999 Sea Ray 400 Sedan Bridge
- Engines
- Convert fuel into noise
Not trying to hijack the thread, but since we are on the subject I thought I would tap the experts here for some info.
I have a 99 400SB with 8.1 mercruisers. On my flybridge I have the SC1000 tachs and a Simrad NSS12 and a NSS8.
The Simrad NSS units will display the engine information, so what do I need to get the information from the SC1000 to the NSS12 and 8? I have an NMEA2000 installed as well.
Thanks.
I have a 99 400SB with 8.1 mercruisers. On my flybridge I have the SC1000 tachs and a Simrad NSS12 and a NSS8.
The Simrad NSS units will display the engine information, so what do I need to get the information from the SC1000 to the NSS12 and 8? I have an NMEA2000 installed as well.
Thanks.
Sanity4life
New Member
Hey, is this vessel view still available? Many thanks