Turkj40
Member
2002 320,
my SB switch is completely dead, indicator lights flash when powered up and thats it
port switch allows trim tabs, lift down and blower to operate only
have 13v at EIM terminals and 13v at quick connect for switches. pulled the dead switch apart and i do receive 13v power and 4.33v on what im guessing is the trigger form the EIM nothing outgoing power wise when buttons are pressed. Any help would be appreciated. looked up some older post with similar issues and no clarity on what may be the problem
my SB switch is completely dead, indicator lights flash when powered up and thats it
port switch allows trim tabs, lift down and blower to operate only
have 13v at EIM terminals and 13v at quick connect for switches. pulled the dead switch apart and i do receive 13v power and 4.33v on what im guessing is the trigger form the EIM nothing outgoing power wise when buttons are pressed. Any help would be appreciated. looked up some older post with similar issues and no clarity on what may be the problem