Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Thanks. Yup, threaded rod is stainless. So is the factory bolt on the left. That’s been working just fine for 20 years.Can't tell from the pic but is the threaded rod on the right stainless? They should be bronze and I don't think it matters whether you're tied to one side or the other. My concern would be breaking the sealant while tightening up the nut if the boat is in the water.
I’ll double check. Sure looks like ss on the outside. It definitely has ss nuts and washers on the water side. And an ss washer on the inside. All the green you see is on and from the ring connector. Not the bolt head.May want to double check that. The reason the one on the left is green is because it's bronze.