liv2ryde100
Active Member
If I can run a new wire with a switch to the windlass solenoid maybe that will do the trick
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
my only problem is my windlass so im waiting to hear from sea ray to see if i can jump out the windlass solenoid with a new power supply.
Oh that’s a good idea also thank you for that. Yea once I get power to it I’ll know if it’s just the anchor button and maybe the up and down buttons still work or the whole thing
No that is my next step though. I haven’t had a second to get on the boat. Gonna try later in the week. Everything is pointing to either the solenoid or eim module. Hopefully it’s the solenoid
After doing a whole lot of research on the matter I’m agreeing with what your saying, just need a second to jump out the solenoid. Hopefully Thursday or Friday I’ll have time
Kevin do u know how the solenoid is wired? I think it’s four posts two high amp and two low amp for the switch. Just need to figure out which of the low amp posts get positive and ground connections
Oh ok sorry, yea I have to check the colors on there I believe they are color coded from the eim harness.Low amps are the smaller wires and posts i would think the ground is black.
BTW, if you reply to my message I will get a notification.
-Kevin
http://marinepropellers.com/ I got mine here a few years ago and were very good and priced right, : )
Thanks Jon, I reached out to them as well as other sources. Will let everyone know what I find.http://marinepropellers.com/ I got mine here a few years ago and were very good and priced right, : )
I am running a culligan house filter that I frequently replace the filter cartridges inside. I can post a pic of how I made it tomorrow for you if u would like
Has anyone added a water tank and/or city water spin on filter?
My screens before the pump are clogging up before I can get through a tank of water. I have since added a RV inline filter at the dock spigot and 3/4" hose gasket screens to city water connection and hoses going to them. Clearly with the high water on Lake Ontario we are having a problem with the dock water because these screens are clogging up quick. I think my fresh water tank is contaminated now with whatever is in the water. I'm treating the tank with a cup of beach each fill up. Even the water saver/reducer on the galley sink gets clogged up and I have to remove and clean. Any suggestions would be welcomed!