Relaxer
New Member
I have found that soap foam from washing your hands will not lift the float switch on the pump in the sump. Started using hand sanitizer instead. No issues now.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
What kind of soap?? I have taken many showers, (soap and shampoo) washed hands hundreds of times. and mine works fine!? You may have a cracked float in switch making it less buoyant ?!? Even the lightest soap is heavier than the float on the switch?!?!I have found that soap foam from washing your hands will not lift the float switch on the pump in the sump. Started using hand sanitizer instead. No issues now.
Does anyone experience issues with keeping the boat level once on plane? Without touching the trim tabs or outdrive trim, the boat will fluctuate what appears to be RPM's causing the boat to list one side or the other. It usually corrects after a few seconds but some of these shifts are pretty abrupt. I am wondering if the RPM synch feature is not working correctly?
Thoughts?
highlife34, you have the synchronizer option? I do not. I have not experienced what you are describing. I assume you can turn it off? Does the same thing happen if it is turned off? If it does, it's another problem. If it does not, then it's the synchronizer.
Agree, this hull has a two step or false plane mode. After on plane, trim tabs full up then bump the outdrive thumb sw trim up slowly you will get a little more bow rise at first then she will settle way down nose over and get a lot more stable. If you go too high with the drives you will hear them get noisy (cavitating) then just back down slightly. And since there is less hull in water better fuel economyTry trimming up a little more than you think you need and see if it stops.