Brad C
New Member
Mines on the back of the rectangular panel by your left footOK, here's another one while you are waiting to thaw out in spring.....
If you have a fluxgate compass for your autopilot, where is it mounted on your 370?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Mines on the back of the rectangular panel by your left footOK, here's another one while you are waiting to thaw out in spring.....
If you have a fluxgate compass for your autopilot, where is it mounted on your 370?
So is it mounted nearly horizontal then? I’ve tried to stand one up vertically but I keep getting bad/drifting headingsMines on the back of the rectangular panel by your left foot
Are you talking about the access for the antenna mounts up high, or the factory speaker holes?I have a question, my boat is currently in storage and I can't measure the round access cover on the side of the arch. Does anyone happen to know what size it is? I am guessing 6 1/2 inches because the speaker that is currently in there is 6 inches.................. ??
The primary lurkers of this thread are 1996-1999 models, which are substantially different than the 1990-1995 model.Hey guys, Still looking for the factory location of a water system accumulator on my '95 370DA
not found around pump and tank. Where is yours? aftermarket?
any help appreciated.
And, another little project in the works last week.
Seeking recommendations on making the final trim cut along the aft edge of the stern platform to follow the sloping curve. Need to devise or acquire a jig for a blade cut
https://www.dropbox.com/sh/xduzf8tggrg7xz0/AAAvQ8S0BiAI47Hu67fJ0DLra?dl=0
I replaced my screw covers on my '99 370 a year ago. I found the part number for the windshield frame in my 3 ring binder owners manual and sent that info to Taylor made directly. This time around it was a rubber molded gasket rather than the rectangular block style. If you already have a molded rubber gasket, you might be able to remove a section to identify the type you'll need.Need to replace the window gasket that covers the screws in the track on the windshield and side glass. Does anyone know what and where to buy? Mine is way over due to replacing. Do I need to go pull a piece up to figure out the profile or on a 370 DA 1998 the pasts place(s) will know?