Sea Strainer cap Gaskets 2003 Sundancer 320da

[David R]

hey guys I am in the process of selling my boat, and my agent just called me. He said that he started the generator (I had asked him too), and the sea strainer is leaking out of the cap. I am 150 miles away from the boat at the moment and wont be able to get to it until Friday which is the same day it is going to be sea trialed. I would like to get it fixed before they take it out.

Does anyone know what Sea Strainers are in a 2003 Sundancer 320da? and what gaskets they use?

 

[R-and-R]

On my '02 340, the sea strainers are all Perko 493xxx.
Looking at your photo, it *appears* there is a number 5 stamped on the housing, just above the nut in the lower right corner. If that's correct, then this is the part you need, but I'm doubtful you'll get it by Friday... https://www.boatid.com/perko/3-4-bronze-top-cover-with-gasket-mpn-049300599e.html

 

[KevinC]

hey guys I am in the process of selling my boat, and my agent just called me. He said that he started the generator (I had asked him too), and the sea strainer is leaking out of the cap. I am 150 miles away from the boat at the moment and wont be able to get to it until Friday which is the same day it is going to be sea trialed. I would like to get it fixed before they take it out.

Does anyone know what Sea Strainers are in a 2003 Sundancer 320da? and what gaskets they use?
View attachment 104609

Have him open the strainer and try re-seating it. Sometimes the gasket gets something stuck under it or if it is moved will seat better and seal.

-Kevin

 

[David R]

Thank you for the info