dinghy

I will post for further research in the Dinghy forum but am looking for Sea Ray 380 specific information here. I have the 2003 380 which is a 42' LOA which includes the platform. What I am not able to find anywhere or get a clear answer from Sea Ray resources is what the specific weight...

Upgraded to 40DA last fall. Looking to purchase a davit system on the extended platform to secure a 310 Avon Rib with 15 Johnson (225 pounds). This is not a long-term boat; the electric solutions are above our 4-year ownership plan and budget. There are no medical concerns. We are not interested...

I am completely on board Team Tender now! Long story short, I always wanted one but there was no room in my slip, which is 35 feet. I got in to a couple engine maintenance projects late this season ... problems arise ... can't get parts etc. So how do I get my fix? A tender of course! A...

Have a 2006 Sea Ray Sundancer 300 with swim platform. Beam is 10.5’ but not sure exact width of swim platform Looking for recos. for a dinghy / davit combo. Would like to be able to keep engine attached (4 stroke?) to dinghy if possible. Willing to pay for nice system if it means not having to...

I am looking at H20 Hurley system for my 340DA to mount a new zodiac aero 10’2” & 6hp 4stroke Mercury outboard. I pulled the prior model through the bay and delta for 20 years but I believe I would like this setup. Any ideas or info would be much appreciated.

I have what I believe to be UMT dinghy chocks on the platform they had a hard material on the top surfaces to keep from scratching the hull of the dinghy well mine are all but missing and I tried contacting UMT and checking their website I cannot find this stuff anywhere Does anyone know what...

Does anyone have any experience with Inmar inflatables? I don't see their name come up very often but am looking at a used one with a removable aluminum floor. The 380PT that I'm looking at would be more for fun and cruising around the harbor than for a true transom dinghy. I have one of...

I have St Croix Model 350 removable dinghy davits to hoist my dinghy up from the water to my swim platform as I detailed in this 2018 post: http://www.clubsearay.com/index.php?threads/420-da-thread.1273/page-75#post-1013007 As my wife and I were hoisting the dinghy up on Sunday, the rear of...

I have a 2010 hard bottom Achilles dinghy with a center console that was installed at the shop where the dinghy was purchased. The center console was added by the shop and the shop has subsequently closed. The windshield on the top of the center console got broke last year when the dinghy...

What covers are the best for protecting the dinghy, keeping water out, and staying on while under way? MM

I have a 310 RIB that I am going to put a new 15hp outboard on. Is electric start awesome or another PIA thing to deal with? Is it a help or a nuisance? MM

We have a 1998 Sea Ray Sundancer 370 which has Weaver davits mounted and the current dinghy is a Achilles 10' air floor with a 6hp Tohatsu engine. We've laid the engine on the platform when under power. We are buying a RIB inflatable that is about 20lbs heavier and will keep the engine mounted...

For those of you who cruise with a dinghy on a submersible swim platform, do you cruise with your dinghy cover on or off? We've been cruising with ours on but often will have water pooling into the dinghy cover when in rough water which worries me because of the extra weight that it's adding to...

I have a 1996 550 DB and am thinking of installing a front deck crane. Sea Ray will not comment as to the max recommended weight as they say the did not design one into the plan so they never spec'd it out.

Hi, I need to install chocks on my hydraulic swim platform. I've been researching my a$$ off and have found that SeaLift sells their flush mount chocks separately. They promote that they can easily be made flush when you want to use the platform. But, "easily" and anything related to...

At the beginning of this year, I purchased my first brand new RIB from this Company. I'm no stranger to dinghy's as I've had two Zodiac Mk1's and an Avon 310 Rover RIB. What really caught my eye was how well built this boat really is. Tubes are fat and bow has a lockable stowage...

I have a '96 400 Express Cruiser. we're wanting to put a Rosskelly/Olsson transom davit for my 11' AB hardshell/15hp Honda. total dinghy weight 350 lbs. Davit is 100lbs. does anyone know what the weight limit (safe) for putting a davit/dinghy on the swim step??

Alliance 11'6" RIB Inflatable Dinghy with 18 HP 2 stroke Tohatsu Engine Year 2000 Hull Material: Hypalon Length: 11'6" Beam: 5'6" $2500 This is a great opportunity to purchase a well made, well cared for hard bottom dinghy with bow locker. Very comfortable and stable with 15" tubes, oars, and...

111

i have a '93 400 EC. looking to put davits on the swim platform for a 10' AB RIB with a 15 HP 4 Stroke Honda. any thoughts out there? we don't want to have to take the outboard off. and keeping as much extra hardware on the back of that swim platform is a necessity. so, no weaver leaver.