my3sons
Well-Known Member
- Feb 24, 2009
- 3,049
- Boat Info
- 2004 400DB, Onan 9 kw Generator, Highfield RIB,
- Engines
- Cummins 6CTA M-3
I have just discovered upon awakening my fresh water systems that my sump is also not pumping... yay me...
On relocating the galley sink drain....
Did everyone just go straight out to the starboard side at the same height as the other outlets?
I wanted it high enough above the waterline so that a valve/seacock is not necessary. I measured the distance from the boot stripe up to the existing thru hull from the shower sump, (that is high enough) and used that to mark a spot on the hull side where it would be closest to the sink where I could also access it easily to bed the fitting and attach the drain line. The air conditioning discharge seacocks are not high enough, at least not on my boat, so you probably do not want to use those for establishing the height.