mquiet
Well-Known Member
I then removed those cushion screws and will only install 4 of them for easier access next time.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
This is the Port on the 06 52DB. Quite possibly the same; at least the hot section...I've got my couch out of mine now, as well the rest of the interior needed to remove the salon floor. I think I took some photos on getting the couch out if you need them. The couch came out fairly easy, the screws in the L brackets in (remove the drawer at the bottom to get to them), unhook rope lighting, seems like there were some bolts in the corner section under the cushion, but I can't remember if they hook to the lay down part of the sofa. Unhook the power to the actuator when you slide the couch out a little.
Any chance someone w/ QSM11s would post some pics of the exhaust system on the STBD from the Turbo back? specifically the riser. I think PO made some changes and it may not have sufficient elevation the way it was installed. PORT pics would be great also. I'm going through these from the exhaust manifolds back (Exhaust manifolds, After coolers, cross over, Heat exchangers, Turbos....) if anyone needs pics of anything or otherwise.
Anyone ever add an overhead electronics box? I would be interested in whom would be a good company to work with in this. Thanks