Drink Holder Replacement

[280 Sundancer]

Greetings, Looking for an OEM replacement drink holder (3 cup) that mounts with two screws to the dash indentation directly above the lounge seat (below the windshield) on the port side of a 2004 Sea Ray 280 Sundancer. Any direction for a source would be greatly appreciated. Thank you in advance.

 

[alwhite00]

Mine had a crack so I pulled it off and recessed two stainless steel cup holders in it's place. It's nice having a cupholder that actually holds a cup. - Just check your clearance underneath.

 

[Tonka Boater]

These are close to the OEM drink holders...

http://www.jamestowndistributors.co...d=product_ad&gclid=CNPC8qHxkc4CFQunaQoduvgEWA

A couple more options:

https://www.amazon.com/Stud-mount-t...80&sr=1-3&keywords=Marine+triple+Drink+Holder

https://www.amazon.com/Amarine-made...80&sr=1-4&keywords=Marine+triple+Drink+Holder

 

[280 Sundancer]

Thanks for the info! Trying to find the flat, plastic/composite drink holder positioned on the dash. I appreciate the help!

 

[Tonka Boater]

Thanks for the info! Trying to find the flat, plastic/composite drink holder positioned on the dash. I appreciate the help!

I see... my 2008 280DA had ones similar to what I posted.

 

[Creekwood]

You may want to consider modifying your holder and adding the stainless ones. Take a look at what I did with my 97 330 similar location plastic (useless) holder. That is an Edson holder mounted in the middle. I Trimmed the OEM plastic to accomodate the stem.

 

[alwhite00]

Here's mine. The factory one is useless.