I'm going to have my bottom stripped (blasted) and then apply an epoxy barrier coat before new antifouling. The blasting service doesn't touch the blocking, so I'll have patches where I will have to move the blocking and sand of the last bits and paint the bottom.
My question is this - what's a recommended procedure to move the blocking so I can sand / paint? The blocking used by the boat yard is cinderblocks with wood cushions, pipe boat stands are not used. My configuration is 2 at the stern edges, 1 mid keel, and 3 in a transverse line forward (port, starboard, and center).
Here are pics of the blocking. Thanks for any advice.
My question is this - what's a recommended procedure to move the blocking so I can sand / paint? The blocking used by the boat yard is cinderblocks with wood cushions, pipe boat stands are not used. My configuration is 2 at the stern edges, 1 mid keel, and 3 in a transverse line forward (port, starboard, and center).
Here are pics of the blocking. Thanks for any advice.