JPGator
Active Member
I guess the point is don't hamstring yourself into a specific dimension. Based on your design your installer can work around some of the obstacles.
Last edited:
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
I'm looking to the exact same thing. I would love to see someone else's upgrade and also, wondering if the existing radar, auto pilot, transducer will work with the new Axiom??Looking to upgrade electronics to an Axiom - likely 9”. Has anyone replaced the C80 or similar with an Axiom? What about the display right in front of the wheel? Size?
Can you post pictures?
Thx!!
Looking to upgrade electronics to an Axiom - likely 9”. Has anyone replaced the C80 or similar with an Axiom? What about the display right in front of the wheel? Size?
Earlier in this thread I saw what I think was a 9” on the left panel, so trying to see what it would look like with a 9” and 7” together.
Can you post pictures?
Thx!!
I'm looking to the exact same thing. I would love to see someone else's upgrade and also, wondering if the existing radar, auto pilot, transducer will work with the new Axiom??
I updated to 2x 9" Raymarine Axioms and Quantum Radar. I will post pictures as soon as I can find them. I also have detailed installation photos to post too.
-Kevin
Great, I'll let you know how it turns out do you remember how much you paid, im in Seattle I could potentially just use the same guy..You bet. It’s exactly the same as your ‘08, yes.
Thanks Kevin - that looks great. I didn’t realize the second 9” would fit.
I’d love to see the installation photos when you have a moment.
Thx for the post. I’m jealous.
Great, I'll let you know how it turns out do you remember how much you paid, im in Seattle I could potentially just use the same guy..
Great!You bet. It’s exactly the same as your ‘08, yes.
Without specific make and model Gens will shutdown during the start for high oil temp, low oil pressure or no water. Is there a code? Check your oil to start. Can you give us anything else? Can you reach back and tell if the impeller is spinning?A couple newbie generator questions.
I turn on the generator and it cranks up but just for 2 or 3 seconds then shuts down and it trips the solenoid breaker.
Are there a couple things I should check first off, I don't see any errors on the control panel.
Chris
Without specific make and model Gens will shutdown during the start for high oil temp, low oil pressure or no water. Is there a code? Check your oil to start. Can you give us anything else? Can you reach back and tell if the impeller is spinning?
Without specific make and model Gens will shutdown during the start for high oil temp, low oil pressure or no water. Is there a code? Check your oil to start. Can you give us anything else? Can you reach back and tell if the impeller is spinning?
A couple newbie generator questions.
I turn on the generator and it cranks up but just for 2 or 3 seconds then shuts down and it trips the solenoid breaker.
Are there a couple things I should check first off, I don't see any errors on the control panel.
Chris
Hi,
It’s a Kohler 5ECD
Serial 2160733
When I scroll through the command screen I get this:
u 0
F .0
o 42
t 31 I would say maybe this one is an E 31 in the top portion is out but the capital F looks fine
b 12.8
Any idea what these mean?
I check the oil and it’s full.
The batteries have been connected to shore power all night, And the port and starboard engine start fine.
Chris