JB MARSHALL
Active Member
Thank you for the help, I did find a cross reference to fleetguard filters.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
So does anyone have any suggestions as to where to purchase the trany filters that do not cost $80 per? The ZF filter part No# is 3213308019 if anyone can cross reference this to a Napa or Fleetguard filter, I have not had success with doing so.
Thank you,
JB
You should use a 10 micron in your Racor.
I use Rotella T, it was recommended by both the surveyor (Cummins Shop in NY) and my local Cummins shop.
I have run Rotella T 15W-40, non-synthetic since I bought the boat in 2012 with excellent oil analysis. I ran Valvoline one year and the metals were a little higher. I am a firm believer in Rotella. Their additives seem to work best for the QSC. Best part is that it is not only the best performing, but the least expensive and readily available.
I'm back, sort of. Been building a house, after we built the dock and moved the boat to our new lot. Still building a house, for 1 year now since breaking ground. Thinking about purchasing a new raw water pump for the port engine (harder to get to) and keeping the original as a spare. There was a great discussion about it quite a while back. What do you guys recommend for the replacement? You know, a good one.