Westie
Active Member
- Oct 16, 2008
- 1,109
- Boat Info
- 2001 260 Sundancer towed with the power of an IFORCE V8
- Engines
- 7.4 L Bravo III
Do you guys put anything on the lug nuts to prevent corrosion? When I took off the wheels so I could repack the bearings and take the drums in to get machined, there where a couple of lug nuts that where harder to remove due to corrosion. The trailer so far has only been in fresh water put I plan on dunking it into salt water this summer.
The way I see it I have 4 options.
1) nothing on the lug nuts
2) use anti seize. There was some discussion here about it being not so good in salt water.
3) Use some grease on them
4) Use perfect seal.
Any practical experience to keep the corrosion away?
The way I see it I have 4 options.
1) nothing on the lug nuts
2) use anti seize. There was some discussion here about it being not so good in salt water.
3) Use some grease on them
4) Use perfect seal.
Any practical experience to keep the corrosion away?