Nelco
Member
Podt in snother are and it was suggested that i post here..
Trying to get my 2005 280 Sundancer ready for the slip.. So close! (Twin 305 MerCruisers)
Ran into an issue and need your advice.
Starboard Trim-Tab - Seem to be working correctly
Port Trim-Tab - When you hit the down button you can hear a relay but nothing happens. Up button has no relay click. No movement on trim-tab.
I checked the level in the hydraulic reservoir ( on the Port side of engine compartment) and it was low. Add some fluid.. Didn't make a difference but the fluid is getting a bit foamy..
Trying to get my 2005 280 Sundancer ready for the slip.. So close! (Twin 305 MerCruisers)
Ran into an issue and need your advice.
Starboard Trim-Tab - Seem to be working correctly
Port Trim-Tab - When you hit the down button you can hear a relay but nothing happens. Up button has no relay click. No movement on trim-tab.
I checked the level in the hydraulic reservoir ( on the Port side of engine compartment) and it was low. Add some fluid.. Didn't make a difference but the fluid is getting a bit foamy..