Boater71
Member
- Mar 5, 2018
- 321
- Boat Info
- 2008 Sea Ray 310 Sundancer
- Engines
- MX6.2 MPI Bravo III DTS with Axius and SeaCore
Kohler Genset
I purchased last year a 2008 SR310 used boat from a reputable marina. the hull/shell were in immaculate condition as the boat was stored high in a boat garage. The engines are Merc 6.2l DTS Seacore 320hp i/o with Bravo 3's with AXIOS - 200 hours. The boat had many issues and the marina worked on replacing all the parts needed - the boat surveyed very well through a reputable captain. I'm trying to see what else I can ask for before final delivery. Here is the list of updates by marina:
appreciate your input!!!
- Starboard engine:
- rebuilt with valve job, new manifolds and risers
- Replace Fuel Module
- Replace Distributor
- Replace Starter
- Replace Risers, Elbows and Manifolds
- Replace Head Gasket
- Replace Spark Plugs
- Replace Water Pressure Senders on each engine
- Replace carrier bearing on starboard drive
- New VHF radio and VHF antenna, Garmin GPS head unit and antenna
- Replace Glomex
- Replace prop nuts
- Change Anodes
- Replaced all hoses on each engine
- Initially Replaced both lower drives and then replaced upper drives (basically new Bravo 3?!?!?)
- New clutch cable
- Few cosmetic replacement (new Isenglass in Canvas, light bulbs in cabin, few)
- I have asked to check end of life for Risers and Manifolds on the port engine
appreciate your input!!!