Here’s a “how to” from their website on how to install a drain plug:
https://boatpluglight.myshopify.com/pages/how-to
Is this the correct way? Any other pointers? I assume I’d need stainless screws.
To fill the old screw holes from the SeaBlaze lights I assume I should use West System Six10...
The ones I have are the white/blue ones. I haven’t contacted Lumitec about them and honestly want to try this drain plug idea unless someone convinces me otherwise. That way if I have one that stops working again I can just unhook the quick connects, unscrew the old one, and quickly reinstall a...
I just ordered one of these yesterday to replace my old head unit:
https://www.crutchfield.com/p_917RA70I/Fusion-MS-RA70.html?tp=61742
Think it’ll work with the WetSounds Stealth?
The boat already has an amp so I might have to buy a RCA splitter to connect the AUX out to the sounds bar.
Thanks
One of the SeaBlaze lights I had installed stopped working and the model I have seems to have been discontinued. It started gradually (only a few of the LEDS would light up) and now it’s completely dead. I checked the wiring and everything looks good there and the other one still works fine...
I’m thinking about adding a white WetSounds Stealth 6 or 10 powered sound bar to my transom and connecting it to my head unit with a RCA to AUX adapter. Has anyone ever done something like this?
It should be easy to install and I won’t have cut speaker holes in my transom. I can route the wires...
Anyone know how to remove the big mirror on the wall of the midcabin? Trying to run a wire from the engine compartment to the electrical panel in the galley. 1998 250Da
Thanks.