Hey guys, Gals, what davit system would you recommend for 2003 sea ray 300DA. I have a 10' Mercury dinghy with a 9.9 merc 2 stroke I use on it. I'm thinking of the weaver system RBD100 but looks like the heads are little short to me. The way the swim platform is at the edge it rises (or has a...
anyone every find these, or replace with something else? can't seem to find anything that will cover the old markings/holes. I measured from top to bottom and its 3.5" most i find are round and maybe around 2.5". also thinking I can get away with smaller one if there was a way to get rid of the...
2003 300DA try to see if I have a smart craft plug so I can use Bluetooth vessel view but not having any luck. They say 2003 and up should have it i read somewhere. Anyone know? And the other hand found these 3 plugs can anyone tell me what there used for thanks.
Just a like to hear your thoughts I'm installing a Garmin 7608 on my boat and I have the old st60 that I want to steal the transducer from do I really need that xt60 anymore or should I just completely remove it from the boat? To me it's just displaying speed and depth with the Garmin will...
hello, can anyone tell me if it is OK to change my raw water sea pump while the boat is still in the water? Do wanna start the job and have water rushing in. I prefer to do it in my slip if possible thanks.
Hello all, I have a 2003 Sea Ray Sundancer 300. My STB side tachometer light is burnt out. I pulled the panel off and don't see any bulb socket, looks fully inclosed. Can anyone tell me how I can fix/replace the light on my tach thanks
Can anyone tell me what the typical cruising speed At what rpm and top speed at what rpm should be on my new to me 2003 300 Sundancer has bravo3's with twin 5.0 liters
Just replaced my full set on my 2003 300DA. Not sure exactly what other years they would fit but i'm assuming up to '06 If anyone could tell me for sure that would be great. Started to repair the sunshade before I decided to change the color and do a full replacement. So I have a fully repaired...
Anyone have experiences upgrading from these old controls to these part# 8M0075245 4500 series gen II controls? Wondering if there smother and if it will cover the old mounting hole with out using an ugly plate. And if your liking the trim switches. And feel and quality.
Any one tell me what I can find and were to replace this unit in my 300 sundancer? its 12000 BTU looking for a drop in replacement. Or has anyone installed less than 12000 Btu and was it good enuf?
looking to upgrade to 8M0075245 gen II remote controls from older style can anyone tell me if the newer style will cover to old hole? I don't mid making it bigger but don't want to add material to cover any voids... thanks
In need of a top drawer or just face with hardware or not. color is cherry wood. the boat is a 2003 sea ray 300DA sundancer. not sure how many years they used the same style drawer but if anyone has anything they like to sell let me know mines missing for some reason.
Hello I'm looking to purchase a 290 to 300 sundancer the 290 has twin 4.3 alpha drives and the 300 has 5.7 alpha drives. I prefer the bigger gas tanks and wider beam on the 300 but like the 290 under cabin layout better as far as the galley goes. Just wondering if anyone finds it weird or not...