Stray Current
Well-Known Member
- Oct 27, 2019
- 2,019
- Boat Info
- 2007 260DA
- Engines
- ‘07 6.2 Horizon MPI / ‘24 SeaCore Bravo III - ‘07
Kohler 5ECD
i just bought a 260 seems one porthole leaks .do they just unscrew and come out ?
Yes the screws on the inside go through the trim ring on the inside into the body of the porthole and it's sandwiches the hull.
Before I went through all the trouble of pulling it out I would check to make sure the latches are tight and the little dogs at the end of them are screwed in to put the most pressure against the plastic. I also took a little Hayward pool filter o-ring lubricant to the gasket around the plastic to seal that up. They could be a little dry by now