Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
My forward running lights are brittle and have broken into pieces. Anyone know of LEDs that match the same footprint, so we don't need to drill more holes?
I went through this painstaking process last year. I could order the port light but not the stbd. of the same model and vice versa, it drove me Bat SH^% crazy with dealers shipping the wrong part numbers multiple times.
I finally got these from Attwood:
Oval, 2NM, Sidelights 304 Stainless Steel NV1012SS-1.
http://old.attwoodmarine.com/store/product/lightarmor-deck-mount-nav-lights
That being said, I did need to drill a new hole for mounting.
Did the boat originally come with something on the panel to the left? I’ve been reading though manuals thst I got with it and ready about the synchronizer controls... that I can’t seem to find. We’re they on that panel at one time maybe?
Where are your engine switches? Post a pic of them.Did the boat originally come with something on the panel to the left? I’ve been reading though manuals thst I got with it and ready about the synchronizer controls... that I can’t seem to find. We’re they on that panel at one time maybe?
Did the boat originally come with something on the panel to the left? I’ve been reading though manuals thst I got with it and ready about the synchronizer controls... that I can’t seem to find. We’re they on that panel at one time maybe?
I only have the switch that you have by your ignition switches. My synchronizer was not working when I bought my boat so I can’t help you with operation.Did the boat originally come with something on the panel to the left? I’ve been reading though manuals thst I got with it and ready about the synchronizer controls... that I can’t seem to find. We’re they on that panel at one time maybe?
Sure. Won’t hurt anything.Question,
I have the props off the boat. Boat is still in the water. I have a vibration on my port motor. While the props are off I wanted to run the boat in gear in the slip to see if I get the vibration without the props on.
Can you run in gear with the props off?
Sure. Won’t hurt anything.
I only have the switch that you have by your ignition switches. My synchronizer was not working when I bought my boat so I can’t help you with operation.View attachment 119755
Unfortunately this is my first boat with a synchronizer but it was disconnected by the PO who said it was inoperable. Hopefully someone with experience can help with the operating instructions.VHF remote speaker makes sense. I had just read in the manual for the synchronizer that came with the boat that it had preset cruise control switch’s along with others. But maybe that was optional. I’m going have to take that panel off now just to see if anything behind it.
So if it is only a single button foe the sync. Can someone tell me how to engage it? Just flip the switch and use one throttle?
operating should be straight forward,Unfortunately this is my first boat with a synchronizer but it was disconnected by the PO who said it was inoperable. Hopefully someone with experience can help with the operating instructions.
Leather Repair, Plastic, Vinyl Restoration: Fibrenew Suffolk South This guy fixed a tear in my vinyl wall by the stairs! it came out awesome. He also repair my rear couch that had an iron burn.. You would never know either.For us 460 owners.
I have a rip in the vinyl/fax leather right by the cabin door on the inside of the cabin.
what have you used to path it or fix it?
doing the same thing, were you able to get the measurements?Looking to replace my sliding door tracks on the 460- has anyone done this and know the measurements off-hand? I need to send them to FP Marine when i order them and figured someone has already done this and they should be the same?