I listed these last summer but I still have them. Hytorq 23x27 pitched to 25 for a 460DA. 2 inch bore. ISO class 1 paperwork. $1800 plus shipping or local pickup in Sarasota.
Re post of an earlier listing. Set of 23x27 2 inch bore props re pitched to 25 inches. ISO Class 1 paperwork. I would rather sell them here for a good price than ebay them. $1800 plus actual shipping.
Used set of props removed from 460 Dancer and used as spares. 23x27 originally, but reduced to 23x25. 2 inch bore. They are in excellent condition and at ISO Class 1 specs. Comes with the prop shop paperwork. $1800.00 plus actual shipping.
110 Volt version. Used once to flush my Cummins 6CTA's. Sold the boat so not needed now. It is $430.00 new on Amazon. Includes a homemade adapter hose for the Cummins heat exchanger.
$175 plus actual shipping.
Mike
On the hook for a night this week and learned a new lesson. Very hot in SW Florida so had the generator on for the night. At about 3 in the morning the genny dies. Got up to investigate and found water had been sprayed in the forward engine area. Down the ladder to look and found a fresh...
This one took me a bit to figure out. While on the boat in the Keys, after my wife showered we noticed the water pumps continuously cycling. I turned off one at a time but could not isolate it. I immediately thought we have a leak. I checked the entire system bow to stern and saw no evidence...
I keep the boat in the water year around here in Southwest Florida. I run the salon a/c in the humidity cycle when not using the boat. I have always had growth in the strainer, so I started using bromine tablets. This worked, but a marine refrigeration tech told me a neat trick. Put a couple...
Every time my inflatable spends too much time under the canvas, it gets mold spots that are hard to remove. My brother-in-law owns a detail business and recommended making a paste of Arm&Hammer and bleach. Use a medium bristle brush and scrub the hypalon. Worked like a charm with minimal...
Has anyone replaced the original flat screen in the forward cabin? I cannot for the life of me see how to remove the thing. I've been with Sea Ray customer service for several days and it seems to have them stumped as well. I would appreciate any information that you might have!!
"Crew Lounge"